Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Applications | Building up of Floors, Fire Rated Walls, Roof Screed, Floor Screed, Tiles, Architectural Purpose |
Color | Grey |
Ph Value | 9-13 |
Click to view more |
Preferred Buyer From
Location | Worldwide |
Product Details
Although the climate changes naturally on its own, humans contribute heavily to pollution of the environment. Carbon dioxide emissions, the main greenhouse gas which causes climate change, actually come from the things that we do every day. More and more people are wondering how they can do their part to help reduce the emission of greenhouse gases into the atmosphere.
Green Product Certification
Sinicon Sand (Sinicon PP) - An Introduction
Sinicon PP - Plastering (Old and New Buildings)
What is Sinicon PP ?
It is a unique volcanic glass, a large deposit of which is found at only one location on the earth which is South Africa. Sinicon PP is made out of feed from this mines using patented manufacturing process to convert this volcanic glass into well-sealed tough glass granules which is ideally suited for use with cementitious and other binders.
How a SINICON PP Cement Plaster mortar application specification (Example) to be prescribed?
Wall and Ceiling Plastering
Provide and apply 12mm thick single coat internal, external and ceiling plaster with Sinicon PP and cement heat proofing mortar at a ratio of 3:1 (Sinicon PP : Cement) with adequate water content for all plain / curved surfaces of brick / block / RCC walls and finishing the same in correct line, level and plumb, making of edges, corners, still, grooves etc. as per drawings and relevant specifications including all necessary surfaces preparations as per Sinicon PP heat proofing plaster methods; cleaning with wire brush to remove fungus / dusts, hacking of surfaces to receive plaster if surface is smooth, wetting and cement grouting of surfaces, curing after application for 14 days, cleaning etc. complete at all levels and all heights. Apply base coat and top coat painting as per specification.
Roof Plastering (Screeding)
Provide and apply minimum 24mm thick single coat roof plaster (screed) with Sinicon PP and cement mortar at a mix ratio of 3:1 (Sinicon PP : Cement) with adequate water content for all plain / slope surface of RCC roof and finishing the same in correct gradient to ensure water is not accumulated anywhere on the roof surface and the corners joints / junctions of roof and retain wall chambered to avoid water seepage as per Sinicon PP heat proofing plastering methods, cleaning with wire brush to remove fungus / dusts, hacking of concrete surface to receive plaster, washing, wetting and cement grouting of surface, curing after application for 14 days, cleaning etc. complete at all the roof surfaces. Apply base coat of white cement as per specification.
Suitability guide
SUITABILITY GUIDE OF SINICON PP | ||||
Note: Before selecting a mix, check structural design and properties. | ||||
Mix Ratio (by volume) Sinicon PP : Cement | 03:01 | 4.5:1 | 06:01 | 10:01 |
TYPICAL PROPERTIES | 1 Bag Sinicon PP (100L) + 1 Bag OPC (33L) | 1.5 Bag Sinicon PP (150L) + 1 Bag OPC 33L) | 2 Bag Sinicon PP (200L) + 1 Bag OPC (33L) | 3.5 Bag Sinicon PP (350L) + 1 Bag OPC (33L) |
External Plaster / Roof Screed | ✔ | x | x | x |
Internal Plaster | ✔ | ✔ | x | x |
Built-up Floors | ✔ | ✔ | x | x |
Insulating roof decks | x | ✔ | ✔ | x |
Fire Seals | ✔ | ✔ | ✔ | ✔ |
Castables | ✔ | ✔ | ✔ | ✔ |
Spray Applications * | ✔ | ✔ | ✔ | x |
Cast Thermal Insulation | x | x | ✔ | ✔ |
Hi! Simply click below and type your query.
Our experts will reply you very soon.